STATIC FIELD DETECTION 
0 Hz - Isotropic hall effect sensor
 
LOW FREQUENCY DETECTION 
10 Hz to 400 kHz - Isotropic coil-based sensor
 
ACCORDING TO ICNIRP GUIDELINES 
For general public and occupational exposure
 
EXPOSIMETER WITH DATALOGGER 
Data collecting and Reporting
 
GPS AND ALTIMETER 
Geolocation of measurements
 
HIGH INTENSITY AUDIBLE, VISIBLE AND VIBRATORY ALARM 
With user definable trigger threshold
 
USB COMMUNICATION PORT 
Data downloading, set-up and battery charging
 
The WaveMon LF-400 is an exposimeter that warns the user of a high level of exposure to low frequency magnetic fields.
 
Warnings are given as a percentage of exposure to a defined limit of a specific standard. It can work with general public or occupational limits.
 
The following exposimeters are now available:
WaveMon LF-400 ICN → For the ICNIRP guidelines
WaveMon LF-400 EUD → For the European EMF Directive 2013/35/EU
WaveMon LF-400 IEEE → For the IEEE standards
 
The WaveMon LF-400 is a low frequency exposimeter that has a datalogger for continuous data recording.
 
Communication with the device is through a USB port that allows you to configure the device and download the recorded data. This makes it easy to create reports and allows you to keep a record of your exposure data for your safety.
 
We have created an accessory that allows you to attach the personal monitor to your harness, arm or belt and so take it in hand to hold it near a radiation source and then put it back in place easily.
 
You can also secure it with a small carabiner so that it won’t be dropped.
 
The device is small and lightweight and works with AA batteries that can be recharged via the USB port. It can also use standard AA batteries, so that they can always be easily replaced.
 
Easy, isn’t it? Because we want you always to be protected.
 
The WaveMon is the only personal monitor equipped with a GPS and Altimeter for geolocation of measurements.
 
As an example, in a high voltage tower, the GPS will provide the geographical position of the tower and the Altimeter the relative height from the ground.
 
Over-exposure alarms can be configured from a PC using the USB connection.
Two different alarms can be programmed and personalised separately for each of the standards: General Public and Occupational.

The alarm level (% of the selected limit) and the type of alarm (sound, vibration or both) can be set-up.
 
Conforms to international electromagnetic field safety standards
 
H/B-field measurements from 0 Hz to 400 kHz
 
Isotropic sensors
 
Weighted response for direct comparison with the standard limit
 
User-configurable alarms
 
High intensity audible, visible and vibration alarms
 
Customisable alarm threshold
 
Optional GPS and altimeter
 
Datalogger to report and record data
 
USB for PC connection to parameterise and download data
Small and lightweight
 
Powered by 2 standard disposable or rechargeable (via USB port) batteries